KSW Kalibrierservice
"Calibrate measuring instruments for precise measurement of physical quantities"

KSW Kalibrierservice GmbH
Our services Our laboratory is ideally equipped
for the calibration of electrical, temperature, pressure, length, mass and force measurands is our laboratory ideally equipped.

Electrical measurands
- DC voltage: source up to 10,000 V, measure up to 70,000 V
- Direct current strength: source up to 2,500 A, measure up to 2,500 A.
- DC resistance: source up to 100 TOhm, measure up to 20 GOhm
- AC voltage: source up to 40 kV, measure up to 70 kV
- Alternating current: source up to 6,000 A, measure up to 6,000 A
- AC resistance 1 ohm to 10 kOhm
- NF power: generate 1,000 W, simulate up to 11.2 kW
- phase angle
- Inductance: source up to 1 H, measure up to 750 kH
- Capacity: source up to 1.1 mF. measure up to 370 mF
- RF power: source 200 mW / 3.3 GHz, measure up to 200 mW / 18 GHz
- Frequency: source up to 3.3 GHz, measure up to 5 GHz

Temperature and humidity
- Temperature: source from -80 ° C to 1200 ° C, measure up to 1200 ° C, simulation up to 1600 °
- Relative humidity rh (%)

Mass and strength
- Mass: source up to 300 kg, measure up to 300 kg
- Scales: up to 300 kG
- Weights: up to 50 kg
- Tensile force: source up to 3,000
- Pressure force: source up to 500 N, measure up to 100 N
- Torque: measure up to 500 N

Dimensional metrics
- Dimensions X, Y and Z with µm accuracy
- Length: source up to 1 000 mm, measure up to 80 m
Repairs
If the repair of your measuring device is necessary, we will gladly submit a cost offer to you.
This can also refer to a cooperation with the measuring instrument manufacturer.
The performance of factory calibrations is permitted to any person or company as long as they can guarantee the traceability of the calibration to the national standards at the Physikalisch Technische Bundesanstalt (PTB) with your measuring standards.
We can also calibrate measuring devices for voltage, current, resistance, capacitance and frequency in our calibration mobile laboratory for your company on site under the same high-quality standards as in our on-site laboratory.
If you are interested in our services, we look forward to hearing from you
ISO calibration of electrical measuring devices on site
CONTACT
Do you have any questions about our services?
If you cannot find the service you want straight away, we will be happy to help you by phone or email. If our calibration service cannot really make you the right offer, we will place your order with one of our partners.
You can reach us by phone on +49 30 5539 74 67 or using our inquiry form.